49
2.13 How to use the Scanner Driver
2
BASIC SCANNER OPERATIONS
5. On the following window, select the profile for scanning.
•When creating a new profile
Select one from already existing profiles and click [Add Profile...] button.
⇒ A new profile will be created based on the profile you select.
•When changing the settings of already existing profiles
Select one from already existing profiles and click [Edit Profile...] button.
⇒ The settings of the selected profile can be changed.
•When using an existing profile, select one of the profiles.
⇒ Scanning will be done with the selected profile’s settings.
⇒ Go to the procedure 9.
6. Select the [Scan] tab and click the [Scanner Settings] on the [Profile
Editor] window.
⇒ The configuration window of ISIS driver appears.
To Next Page
Loading...
Need help?
General