Getting started
Setting up the device
VideoworkstationErgonomicDevice
When setting u p your device, please rea d the recommendations and
safety notes in the "Safety/regulations" manual.
We recommend that you place your de vice on a surface with good anti-slip qualities.
In view of the multitude of different finishes and varnishes used on furniture, it is
possible that the rubber feet will m a rk the surface they stand on.
Depending on the location of your device, bothersome vibrations and no ises may
occur. To prevent this, a distance of at least 10 mm / 0.39 inch should be maintained
from other devices or objects on casing sides without ventilation areas.
In order to avoid overheating, do not cover the ventilation areas
on the monitor or the device.
A minimum distance of 200 mm / 7.87 inch from the device must
be observed for ventilation areas.
Do not place multiple devices on one another and do not keep any monitor on the d evice.
Do not expose the device to extreme ambient conditions (see "
Technical data",
Page 101, "Ambient conditions"). Protect the device from dust, humidity, and heat.
Operating position
You can use the device in various operating positions.
Horizontal, top casing cover upwards
With the FUJITSU Desktop ESPRIMO Q55x/Q957/Q958 device version, you
will ne ed to affix the ad hesive feet you were supplied with to the four corners
of the underside of the device in this operating position, refer to Section
"
Attaching the adhesive feet (o ptional)", Page 24.
20 Fujitsu
To Next Page
Loading...
