Fujitsu ESPRIMO Q55 Series - Installing a 2.5 Inch Hard Disk

System expansions
3
3
► Release the die EasyChange rails from the hard disk (3).
► If you do not want to
remove or install any other components, replace the drive c age
and the top casing
cover (see "
Installing the drive cage", Page 69 and "Securing the
top casing cover"
, Page 67). Take care that no cables get jammed.
Installing a 2.5 inch hard disk
• The top casing cover and drive cage have been removed (see "Removing the casing
top cover", Page 66 and "Removing the drive cage", Page 68).
1
1
► Secure the E asyChang e rails to the side of the hard disk drive (1) by inserting t he pins
of the EasyChange rail into the corresponding h oles in the hard disk.
90 Fujitsu