Operation
► Fold the locking latching clip fully to the right until it is lying against the rear of
the device and secure a padlock to th e padlock clamp.
Alternatively you can use a K ensington L ock cable (see "Using the
security lock", Page 52). This will prevent unauthorised opening of the
latching clip and, with it, the casing cover.
Lead-sealing the casing
To prevent unauthorised persons from opening th e casing, the casing can be lead-sealed.
► Use the wire of the lead-seal to connect the locking bracket with the padlock clip
on the back of the device (see chapter "
Rear", Page 12).
Lead-seali
ng
Lead-sealc
hain
Lead-sealw
ire
Mechanical
lock
► Use the seal to secure the lead-sealing chain or wire.
Fujitsu 55
To Next Page
Loading...
