Getting started
Connecting external devices to the USB ports
USBdevicesUSBportExternaldevicesDevices
You can connect a w ide range of external devices to the USB port s (e.g.
printer, scanner, modem or keyboard).
USB devices and hot plug-enabled. This means you can connect an d disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the exte rnal device.
► Connect th e data cable t o one of the USB port s on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the Operating System. If the device requires separate software, please follow
the instructions in the manufacturer’s docume ntation.
Connecting a PS/2 d
evice
Only use the supplied lead.
A PS/2 device is only recognised by the PC if you connect the PS/2 device
when the PC is switched off and then switched on again.
ConnectingaPS/2deviceconnecting
► Connect the PS/2 device to the PS/2 port on the PC.
► Switch the PC back on.
Fujitsu 37
To Next Page
Loading...
Need help?
General