Getting started
Attaching the adhesive feet (optional)
With the horizontal and vertical o perating positions with no base, you will need
to attach the adhesive feet to the device.
1
1
1
1
2
2
2
2
► Vertical opera
ting position with no base: Position the adhesive feet on the four corners
of the left sid
e of the device as illustrated (side w ith screw holes for attaching the base).
Affix the adhes
ive feet in such a way that no fan vents are covered.
► Horizontal operating position with no base: Position the adhesive feet on the four
corners of the underside of the device as illustrated (2).
24 Fujitsu
To Next Page
Loading...
