System expansio ns
Installing the fan
• The top casing cover and drive cage have been removed (see "Removing the casing
top cover", Page 66 and "Removi ng th e drive cage", Page 68).
1
► Place the fan in i ts inst allation position in the casing (1).
a
a
► Make sure that the locking lugs (a) re-engage.
► Connect the fan cables to the motherboard.
► If you do not want to remove or install any other components, replace the drive cage
and the top casing cover (see "
Installing t he drive cage", Page 69 and "Securing the
top casi ng cover", Page 67). Take care that no cables get jammed.
Fujitsu 93
To Next Page
Loading...
