System expansio ns
If y ou w ant to in stall a blanking co ver
► Install the blanking plate (see "If you want to install a blanking cover", Page 75).
If you want to install an optical drive
► Insert the o ptical drive and associated lead (see "I nstalling a drive", Page 71).
If you want to install a second hard disk
► Install the second hard disk and the associated ca ble (refer to "Installing a hard disk", Page 78).
Removing and installing the 2.5" hard disk
Removing a 2.5 inch h
ard disk
• The top casing cover and the drive cage have been removed and the data and power
supply cables detached from the hard disk and motherboard (see "
Removing the casing
top cover", Page 66 and "Removi ng th e drive cage", Page 68).
1
1
2
► Press the EasyChange rails mounted on the hard disk together slightly (1) and pull the
hard disk out of the drive cage in the direction of the arrow (2).
Fujitsu 89
To Next Page
Loading...
