System expansions
If you have already installed a SmartCard reader/palm sensor
► Remove the SmartCard reader/palm sensor and associated lead (see
"
Removing the r eader/sensor", Page 87).
Installing a hard disk
► Remove the drive cage (see "Removing th e drive cage", Page 68).
► Attach the drive leads to the motherboard (see graph ic on slots in Section "
Overvie w
of th e installation openings and drives in your device", Page 62).
1
1
a
2
► Install the drive leads on to the drive cage (1) as illustrated.
► Insert the plug for the drive leads (a) through the opening in the drive cage (2).
► Reinstall the drive cage (see "
Installing the drive cage", Page 69). Take
care that no cables get jammed.
4
3
► Place the hard disk (6) in the installation frame (3).
78 Fujitsu
To Next Page
Loading...
