System expansions
Inserting and removing the M.2 m
odule
Removing M.2 module
• The top casing cover and drive cage have been removed (see "Removing the casing
top cover", Page 66 and "Removing the drive cage", Page 68).
• The fan has been removed (see "
Removing the fan", Page 92).
b
a
a
2
1
► Loosen the screw (1).
► Pull the M.2 module (b) slightly at an angle in the direction of the arrow (2) and out
of the slot (a) on the motherboard and remove it from the casing.
► Reinstall the fan (see "
Installing the fan", Page 93).
► If you do not want to remove or install any other components, replace the drive c age
and the top casing cover (see "
Installing the drive cage", Page 69 and "Securing the
top casing cover", Page 67). Take ca re that no cables get jammed.
94 Fujitsu
To Next Page
Loading...
