System expansio ns
If you have already mounted a blanking plate
1
► Remove the blanking plate (1) that the drive cage bay is secured with.
Keep the blanking plate safe for later use, e.g. if you ever remove
the hard disk again at a later date.
Ensure tha t you do not pull strongly on attached leads.
2
3
► Remove the screw (2) and lift the metal cover (EMC protection) secured by it off the casing (3).
If you have already fitted an optical drive
► Remove the optical d rive and associated cabling (see "Removing the drive", Page 73).
Fujitsu 77
To Next Page
Loading...
