• Very Low Priority
This mode operates slower than the Low Priority mode.
Select this mode when performance is affected (such as when the performance of host response is
reduced) by the Automatic Priority or Low Priority mode.
4 In the confirmation screen, click the [OK] button.
EC/OPC priority setting starts.
5 In the setting completion screen, click the [Done] button.
The screen display returns to the [Setting (Advanced Copy)] screen.
Chapter 9 Advanced Copy Settings
9.1 Advanced Copy Basic Settings
142
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
