Fujitsu ETERNUS AF250 S2 - Performing a Copy (Snapopc+)

5 In the setting completion screen, click the [Done] button.
The screen display returns to the [Snap Data Pool] screen.
9.2 Performing a Copy (SnapOPC+)
SnapOPC+ is a function to copy the data of the operation volume before update (previous data) to the dupli-
cate volume.
Though SnapOPC+ can be executed both from ETERNUS Web GUI and ETERNUS CLI, operation using batch
files is recommended in consideration of daily operations.
Copy session are first created for seven generations. These copy sessions are switched in turn when daily
backup operations are performed.
The procedure to perform SnapOPC+ is as follows:
1 On the navigation of the ETERNUS Web GUI screen, click the [Advanced Copy] tab.
2 In [Action], click [Start SnapOPC+].
3 Click the [Browse] button of the copy source volume.
Chapter 9 Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
146
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0