3.2.2 Driver Installation
Install the LAN driver and the ETERNUS Multipath Driver.
■
LAN Driver Installation
The following procedure explains how to install the LAN driver.
When using the onboard LAN card, skip this procedure.
1 To install a LAN driver, refer to the instructions for the LAN card.
2 Check that the driver has correctly been installed.
■
ETERNUS Multipath Driver Installation
The following procedure explains how to install the ETERNUS Multipath Driver.
1 Insert the CD-ROM into the server, then from Windows Explorer double-click on "setup.msi" in the "Eng-
lish" folder of the CD-ROM.
A screen to confirm the start of installation appears.
2 Click the [Next] button.
A screen to specify the installation directory of the ETERNUS Multipath Driver and which user installs the
driver appears.
3 To change the installation directory, click the [Browse] button and select the installation directory. To
leave the settings unchanged, click the [Next] button.
Chapter 3 Checking the Configuration Environment
3.2 Server Connection Preparation
36
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
