Fujitsu ETERNUS AF250 S2 - LUN Recognition Check

8.2.2 LUN Recognition Check
When connection is completed, confirm that the server recognizes the LUN set to the ETERNUS AF.
■
When Checking Using the Windows Device Manager
The following procedure explains how to check LUN using the Windows Device Manager.
1 Open [Device Manager] and expand [Disk drives].
2 Confirm that the same number of "FUJITSU..." items are displayed as the number of LUNs that are set.
If the example is used, eight "FUJITSU..." items are displayed.
Chapter 8 SAN Connection Settings
8.2 Server Connection Setup
128
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0