Fujitsu ETERNUS AF250 S2 - Checking the Copy Sessions; Checking the Luns

10.4 Checking the Copy Sessions
On the [Advanced Copy] screen, the status of the copy sessions that are set is displayed. Check if the copy
session status is normal.
To display the [Advanced Copy] screen, click the [Advanced Copy] tab on the navigation of the ETERNUS Web
GUI screen and click the number of sessions in [SnapOPC+ Sessions].
10.5 Checking the LUNs
Check the LUN status from the server.
This section describes the check procedure using the ETERNUS Multipath Driver.
Click the [Start] button for Windows, expand [ETERNUS Multipath Driver] from [All Programs], and open
[ETERNUS Multipath Manager]. Check that the LUN status is normal (that the signal icon is blue).
Chapter 10 System Status Check
10.4 Checking the Copy Sessions
155
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0