Fujitsu ETERNUS AF250 S2 - Powering on; Switching on and off the Main Line Switch on the Power Distribution Unit; Figure 5.4 on Position (Marked |) of the Main Line Switches on a 1 U Power Distribution Unit; Figure 5.5 on Position (Marked |) of the Main Line Switches on a 2 U Power Distribution Unit

5.2 Powering On
This section explains how to turn on the ETERNUS AF.
5.2.1 Switching On and Off the Main Line Switch on the Power Distribution Unit
Turn the main line switch of the power distribution unit to the ON position (marked "|").
Make sure all of the main line switches are in the ON position.
● For 1U
Figure 5.4 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
● For 2U
Figure 5.5 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
Chapter 5 General Settings
5.2 Powering On
59
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0