Fujitsu ETERNUS AF250 S2 - Slow I;O Access; Server Does Not Recognize Volumes

A confirmation screen appears.
4 Click the [OK] button.
The volume is created and the registration completion screen appears.
5 Click the [Done] button.
The screen display returns to the [Volume] screen.
5.7.4 Copy Data Destination Volume (SDPV) Creation
Create a copy data destination volume in the backup RAID group.
Create a volume as an expansion area of SDV in the backup RAID group "RG1" created in "5.7.1 RAID Group
Creation" (page 74
).
Figure 5.10 Copy Data Destination Volume (SDPV) Creation
Copy data destination volume
sdpv
(Snap Data Pool Volume)
500GB
Backup RAID group (RG1)
RAID5 (4+1)
3.84TB
3.84TB
3.84TB
3.84TB
3.84TB
Chapter 5 General Settings
5.7 RAID Configuration Settings
80
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0