Fujitsu ETERNUS AF250 S2 - Figure 5.2 Example of Creating Operation Volume and Backup Volume

● ETERNUS AF Environment
Create the operation volume and backup volume in the ETERNUS AF
.
Figure 5.2 Example of Creating Operation Volume and Backup Volume
ETERNUS AF
RAID group 0 (RAID1+0)
3.84TB × 4
RAID group 1 (RAID5)
3.84TB × 5
Standard
Snap Data Volume (SDV) (*1)
Snap Data Pool Volume (*2)
1TB
500GB
Operation volume
sdv0
sdpv
main
sdv1 sdv2 sdv3 sdv4 sdv5 sdv6
Generation management volume
Copy data destination volume
*1: SDV is used as the copy destination for SnapOPC+ and stores generation data.
*2: SDPV is the expansion area of the SDV and is used to configure the Snap Data Pool (SDP) area.
Chapter 5 General Settings
57
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0