Fujitsu ETERNUS AF250 S2 - Chapter 10 System Status Check; Checking the Component Status

Chapter 10
System Status Check
Check the status of the ETERNUS AF on the ETERNUS Web GUI screen or ETERNUS CLI.
10.1 Checking the Component Status
The status of the ETERNUS AF can be checked by general status in the upper left of the ETERNUS Web GUI
screen.
When the general status image is " ", the ETERNUS AF is in normal status. When the general status
image is other than " " (" ", " ", etc.), an abnormality has been detected in the ETER-
NUS AF. Check the status of each component on the [Storage] screen.
If there is a component in Warning or Error status, contact your sales representative or maintenance engi-
neer.
152
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0