• Do not use the server service outlet to connect a power cord for the ETERNUS
AF
.
4.4.2 When 1U Power Distribution Unit Is Installed (for Regions other than the
EMEIA, Central American, and Caribbean Regions)
The following procedure explains how to connect the power cord when a 1U power distribution unit is instal-
led.
To help with power cord management and prevent incorrect connections, attach labels to the power cords
and make a note of connection origins and destinations.
1 Remove the power cord clamp from the power distribution unit.
Power distribution unit
Power cord clamp
Chapter 4 Connecting Cables
4.4 Power Cord Connection
51
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
