Fujitsu ETERNUS AF250 S2 - ETERNUS CLI Status Display; Event Notification Setup

3.4.2 LAN Related Specifications
■
Network Communication Protocols
The usable LAN ports and functions are different depending on the usage and protocol.
The following table shows how the LAN ports may be used (by usage and protocol).
Table 3.2 LAN Port Availability
Usage Protocol tcp / udp
Port
number
Direction
Master CM Slave CM
Remarks
MNT RMT MNT RMT
ETERNUS Web GUI http /
https
tcp 80 / 443 from
¡ ¡
△ (*1) △ (*1) Accessed
from a
Web
browser
ETERNUS CLI telnet /
ssh
tcp 23 / 22 from
¡ ¡
△ (*1) △ (*1) −
ftp (cli-
ent)
tcp 21 to
¡ ¡
△ (*1) △ (*1) −
SNMP agent snmp udp 161 from
¡ ¡ ¡ ¡
−
trap snmp
trap
udp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
−
SMI-S http /
https
tcp 5988 /
5989
from
¡
´ ´ ´
Used for
SMI-S cli-
ent com-
munica-
tion
http /
https
tcp Must be
set
to
¡
´ ´ ´
Used for
event
commu-
nications
with the
SMI-S lis-
tener,
etc.
SLP tcp 427 from/to
¡
´ ´ ´
Used for
service
inquiry
commu-
nication
from the
SMI-S cli-
ent
E-mail smtp (cli-
ent)
tcp 25 (*3) to
¡ (*2) ¡ (*2)
´ ´
Used for
failure
notifica-
tion, etc.
NTP NTP (cli-
ent)
udp 123 to
¡ (*2) ¡ (*2)
´ ´
−
Chapter 3 Checking the Configuration Environment
3.4 LAN Connection Preparation for Operation Management
42
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0