Fujitsu ETERNUS AF250 S2 - Page 147

4 Select the radio button of the volume that is to be used, and then click the [OK] button.
Select the "No.: 0, Name: main" volume.
5 In the same way as the copy source volume, click the [Browse] button of the copy destination volume.
Chapter 9 Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
147
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0