Fujitsu ETERNUS AF250 S2 - Page 144

To send notification automatically when the usage rate exceeds the threshold, enable notification in
"6.1 Event Notification Setup" (page
85) and specify the notification method (email, SNMP, trap, or
Syslog).
4 In the confirmation screen, click the [OK] button.
Copy table size setting starts.
5 In the setting completion screen, click the [Done] button.
The screen display returns to the [Setting (Advanced Copy)] screen.
Chapter 9 Advanced Copy Settings
9.1 Advanced Copy Basic Settings
144
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0