3 Use the power cord clamps to prevent the power plugs from coming unplugged.
Attach the power cord clamps removed in Step 1.
4 Connect the plugs on the other end of the power cords (AC input cables) that are attached to the power
distribution unit to sockets.
Power supply failure can be prevented by connecting the power cords (AC input cables) on the power
distribution unit #0 side and the power distribution unit #1 side to different power sources.
Connect to power outlets.
AC input cables
Power
distribution
unit#1
Power
distribution
unit#0
Chapter 4 Connecting Cables
4.4 Power Cord Connection
54
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
