(3) Click the [Done] button.
The [Set Thin Provisioning] screen appears.
4 Thin Provisioning setup
Enable or disable the Thin Provisioning function and set the maximum pool capacity.
(1) Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2) Click the [OK] button.
The Thin Provisioning is set and the change completion screen appears.
(3) Click the [Done] button.
The [Register Advanced Copy License] screen appears.
Chapter 5 General Settings
5.4 Storage Management (Initial Setup 1)
66
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
