A confirmation screen appears.
4 Click the [OK] button.
The volume is created and the registration completion screen appears.
5 Click the [Done] button.
The screen display returns to the [Volume] screen.
6 Then, create SDV and SDPV in the backup RAID group (RG1).
For the creation procedure, refer to "
5.7.3 Generation Management Volume (SDV) Creation" (page 79)
and "5.7.4 Copy Data Destination Volume (SDPV) Creation" (page 80).
Chapter 5 General Settings
5.7 RAID Configuration Settings
78
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
