4 In the [Setup Remote Support] screen, set the items in [Customer Information File] and [Communica-
tion Environment Information File].
5 Click the [Set] button.
A confirmation screen appears.
6 Click the [OK] button.
The remote support settings are applied.
7 Check the setting completion message and click the [Done] button.
The screen display returns to the remote support screen.
The specified information is sent to the remote support center and the connection of the
ETERNUS AF
and the remote support center is checked.
The connection check result is sent to the e-mail address that is set in "Result notification information".
Chapter 6 Monitoring Settings
6.3 Remote Support Setup
99
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1832-04ENZ0
To Next Page
Loading...
