Chapter 1 System Management
1.9 Event/Dump Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
152
4 Click the [OK] button.
Log export starts. The progress screen is displayed.
After the log export is finished, a screen to execute downloading the file is displayed.
5 Click the [Download] button to save the exported log.
A dialog box to download the file appears.
6 Save the log file.
The default file name is "Log_serial number for the ETERNUS DX_YYYY-MM-DD_hh-mm-ss_serial num-
ber for log file.zlg". (YYYY-MM-DD_hh-mm-ss: the date and time when the download screen (Step 5
) is
displayed. When a log file is segmented, the segmented log files are given the same name and num-
bered serially (01 -).)
If the log file is segmented, download and save the next segment (save all the segmented files).
When exporting the log is complete, save the log file immediately.
If "Non-segmentation" is selected in the "Log File Size" field, the [Download] button becomes inactive
after the log file has been saved. Proceed to Step 6
.
When exporting segmented log files, make sure to export the segment within five minutes. If five
minutes pass before exporting the next segment, the log export fails. After finishing saving each
segment, save the following segment immediately.
To Next Page
Loading...
