Chapter 2 Component Management
2.5 Turn on Locator Beacon/Turn off Locator Beacon
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
235
■ Turning on the LED
The procedure to turn on an LED is as follows:
1 Click [Turn on locator beacon] in [Action].
A confirmation screen appears.
2 Click the [OK] button.
The locator beacon is turned on.
3 Click the [Done] button to return to the screen when starting this function in Step 1.
■ Turning off the LED
The procedure to turn off an LED is as follows:
1 Click [Turn off locator beacon] in [Action].
A confirmation screen appears.
If the LED is already turned on, [Turn on locator beacon] cannot be selected.
If the LED is already turned off, [Turn off locator beacon] cannot be selected.
To Next Page
Loading...
