Chapter 4 Connectivity Management
4.4 LUN Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
469
4 Specify the LUNs and the number of LUNs for volume allocation and select the volume
numbers to start the allocation to the corresponding LUNs from.
The main setting items are as follows.
● LUN Setting
• Start Host LUNs
• Number of LUNs
● Select Volume
• Select Volume
5 Click the [OK] button.
Returns to [Modify LUN Group] screen.
If an error screen appears under the following conditions, check the parameter settings.
• The LUN, which is specified in "Start Host LUNs", has already been allocated to a different volume
• The volumes, which have been specified in "Number of LUNs", cannot be allocated to the
necessary number of LUNs
To Next Page
Loading...
