Chapter 4 Connectivity Management
4.4 LUN Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
470
6 Repeat Step 3 through Step 5 to set multiple allocation information between the LUNs and
the volumes.
7 Check the LUN and the volume allocation information to be registered in the LUN group,
click the [Modify] button.
A confirmation screen appears.
8 Click the [OK] button.
Modifying LUN group starts.
9 Click the [Done] button to return to the [LUN Group] screen.
If an error screen appears under the following conditions, check the parameter settings.
• The "Name" is not entered
• The "Name" does not satisfy the input conditions
• The "Name" matches with an existing LUN group name
• A host cannot recognize some LUNs
To Next Page
Loading...
