Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
756
• Key Valid Period
• Key Server
Description Select a key expiration period that is based on the date when the key from the server is
obtained for the first time (beginning of use).
When the key expires, a new key is obtained from the key server and the expired key is
automatically replaced. The key expiration period is checked every eight hours.
Input condition/
Display contents
• Unlimited
The same key is used until exactly 20 years elapses since the key was first used.
• 1 month - 12 month
The same key is used until the date and time in the specified month elapses since
the key was first used. If the same date does not exist in the specified month (such
as April 31st), the expiration date of the key becomes the last date of the specified
month.
Description Select the key server ID that is assigned for the master or slave server.
"None" and the registered key server ID are displayed as options.
Input condition/
Display contents
• Master
- None
- 1
- 2
• Slave
- None
- 1
- 2
The same server ID (except for "None") cannot be selected for both the master and slave servers.
The key can only be updated when the master server is specified. Refer to "1.11.8 Update SED Authentication Key"
(page 176) for details.
To Next Page
Loading...
