Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
757
A.1.10.5 Modify Key Group
For details about this function, refer to "1.11.7 Modify Key Group" (page 174).
● Key Group Setting
• Name
• Storage System Group Name
Description Input a key group name.
The key group name corresponds to "Serial Number", which is managed in the key server.
Input condition/
Display contents
• Alphanumeric characters
• Symbols (underscore "_")
• The first letter must be an alphabetic character
• Up to 32 characters
Do not change the key group name after the key status changes to "Normal". The key status can be checked on the
[Key Group] screen. Refer to "Key Group" in "ETERNUS Web GUI User’s Guide (Operation)" for details.
Description Input the storage group name.
The storage system group combines the key management device (Key Management
Machine) name that is managed by the user with the key groups. The storage system
group name corresponds to "Storage Group Name", which is managed in the key server.
Input condition/
Display contents
• Alphanumeric characters
• Symbols (underscore "_")
• The first letter must be an alphabetic character
• Up to 16 digits
Do not change the storage system group name after the key status changes to "Normal". The key status can be
checked on the [Key Group] screen. Refer to "Key Group" in "ETERNUS Web GUI User’s Guide (Operation)" for details.
To Next Page
Loading...
