Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
777
• Change Password
• Authentication Password
• Confirm Password
A.1.12.6 Setup Remote Session Permission
For details about this function, refer to "1.14.2 Setup Remote Session Permission" (page 209).
For the factory default settings for this function, refer to "Appendix B Setup Remote Session Permission" (page
986).
● Remote Session Permission Setting
• Remote Session
Description To change the proxy server authentication password, select the checkbox.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Select the "Change Password" checkbox and then input the password for proxy server
authentication.
When inputting the password, "*" is displayed to hide the specified value.
If a proxy server is not used, this item does not need to be set.
Input condition/
Display contents
Up to 64 alphanumeric characters and symbols
Description Select the "Change Password" checkbox and then input the password for proxy server
authentication again.
When inputting the password, "*" is displayed to hide the specified value.
If a proxy server is not used, this item does not need to be set.
Input condition/
Display contents
Up to 64 alphanumeric characters and symbols
Description Select whether to "Permit" or "Forbid" a remote session from the AIS Connect server.
Input condition/
Display contents
• Permit
• Forbid
To Next Page
Loading...
