Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
833
■ When registering a host by manually specifying the host
● Host Setting
• iSCSI Name
A.4.2.9 Add SAS Host
For details about this function, refer to "4.2.11 Add SAS Host" (page 416).
For the factory default settings for this function, refer to "Appendix B Add SAS Host" (page 993)
.
■ When registering a host by selecting from the host list
● Host Setting
• Checkbox to select a host
• Name
Description Input the iSCSI name of the iSCSI host (required).
Input condition/
Display contents
• 4 - 223 alphanumeric characters and symbols ('-', '.', ':')
• The name starts with "iqn." or "eui."
For setting items, refer to "Host Setting" (page 830)
in "When registering a host by selecting from the host list"
(page 830).
Description Select the checkbox of the SAS host that is to be registered in the ETERNUS DX.
The host name and host response can only be specified for the selected SAS host.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Input the name for the SAS host.
Input condition/
Display contents
Up to 16 alphanumeric characters, symbols (except "," (comma) and "?"), and spaces
To Next Page
Loading...
