Fujitsu Eternus DX600 S3 - Page 834

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
834
• Host Response
■ When registering a host by manually specifying the host
● Host Setting
• SAS Address
A.4.2.10 Modify FC/FCoE Host
For details about this function, refer to "4.2.15 Modify FC/FCoE Host" (page 423).
● FC/FCoE Host Setting
• Name
• WWN
Description Select a host response to be assigned to a SAS host.
The host response list created in the ETERNUS DX is displayed.
Input condition/
Display contents
• Solaris MPxIO
• HP-UX
• AIX
• AIX VxVM
• VS850/SVC
• BS2000
• Host responses created in the ETERNUS DX
• Default
Description Input the SAS address for the SAS host.
Input condition/
Display contents
• Hexadecimal numbers (0 - 9, A - F, a - f)
• 16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
For setting items, refer to "Host Setting" (page 833)
in "When registering a host by selecting from the host list"
(page 833).
Description Specify a new FC host name.
An existing host name cannot be specified.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Specify a new WWN.
The registered WWN cannot be used.
Input condition/
Display contents
• Hexadecimal numbers (0 - 9, A - F, a - f)
• 16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)