Fujitsu Eternus DX600 S3 - Page 894

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
894
• IPv6 Connect IP Address
• IPv6 Gateway
• IPv6 Prefix length
A.4.7.5 Change NAS Server Name
For details about this function, refer to "4.8.7 Change NAS Server Name" (page 512).
For the factory default settings for this function, refer to "Appendix B Change NAS Server Name" (page 1002)
.
● NAS Server Settings
• Name
Description Input the IPv6 connect IP address of the target port.
Input condition/
Display contents
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
Description Input the IPv6 gateway address of the target port.
Input condition/
Display contents
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to "IPv6 Address Notation" (page 378)
for details.
Description Input the IPv6 prefix length of the target port.
Input condition/
Display contents
3 - 128
Description Input the NAS server name for the ETERNUS DX S3 series.
Input condition/
Display contents
Up to 15 alphanumeric characters and symbols (in the US-ASCII format)
The following list shows the available characters:
• 0 (0x30) - 9 (0x39)
• A (0x41) - Z (0x5A), a (0x61) - z (0x7A)
• A hyphen (0x2D) except as the first and/or the last character