Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
954
● Remote Device Information
• Checkbox to select the measuring target
Specification for applying result
*1: The comparison result between "created path information" and "path information in the ETERNUS Disk storage
system" is displayed.
*2: If the path information file is applied to the ETERNUS Disk storage system under this condition, the contents of the
path information in the ETERNUS Disk storage system and the backed up path information file do not match.
Description Select the checkbox of the remote storage system to measure the round trip time.
This checkbox is only displayed for the remote storage system of which connection type
is "Remote".
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Comparison result (*1)
Display item in the "Result of applying" field
Status of the checkbox for selecting a Box ID
Selected
(Apply the
information)
Cleared
(Do not apply the
information)
Default
The Box ID information
exists in both storage
systems
The path information is
the same
Do not Change Do not Change Do not Change
The path information is
different
Change Do not Change (*2) Change
The Box ID exists only in the created path
information
Add Do not Add Add
The Box ID information exists only in the path
information in the ETERNUS Disk storage system
Delete Do not Change (*2) Do not Change
To Next Page
Loading...
