Fujitsu Eternus DX600 S3 - Page 955

Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
955
Display example of an applying result and an actual applying result
(Example 1) When applying the created path information to the ETERNUS Disk storage system (all of the
checkboxes for selecting the Box IDs are selected)
Created path information
Storage
system 4
Storage
system 1
Storage
system 3
Path c Path b
Path information in the storage system
Checkbox to
select a Box ID
*1: Because there are no differences between "created path information" and "path information
in the ETERNUS Disk storage system", the checkbox is selected and cannot be changed.
Storage system 2: Selected, Storage system 3: Selected (*1), Storage system 4: Selected
Result of applying
How the path information in the storage system is
to be changed after applying the created path
information is displayed.
Path a: Delete, Path b: Do not Change, Path c: Add
All the path information ("path information in the storage system", "backed
up path information", and "downloaded path information") are the same.
Storage
system 4
Path c Path b
Storage
system 4
Storage
system 1
Storage
system 3
Path c Path b
Path information in the storage system (actual result of applying)
Backed up path information (*2)
Downloaded path information (*3)
Storage
system 4
Storage
system 1
Storage
system 3
Path c Path b
Created path
information
is applied
Application result
Obtained path information
Storage
system 2
Storage
system 1
Storage
system 3
Path a Path b
Storage
system 1
Storage
system 3