Fujitsu F-02F - Default Chapter; Wireless & Networks

Settings
106
◆ Setting access point (APN)
Access point for connecting to the Internet (sp-mode) is
already registered. You can add and change access points if
necessary.
When using mopera U or Business mopera Internet, add
access point manually.
For details on mopera U, refer to mopera U website.
･ When Tethering is set to on, access point setting is
unavailable. → P111
❖ Checking the access point in use
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...]
→ [Mobile
networks]
→ [Access Point Names]
❖ Adding new access point (New APN)
･ Do not change the MCC/MNC to other than 440/10. The
setting disappears from the screen.
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...]
→ [Mobile
networks]
→ [Access Point Names]
2
→ [New APN]
3
[Name] → Enter a network profile → [OK]
4
[APN] → Enter the access point name → [OK]
5
Enter other items required by network
operator
→→ [Save]
✔ INFORMATION
･ If you have changed MCC/MNC settings and they do not
appear on the APN list screen, reset access point or make
access point settings in [New APN] again.
❖ Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...]
→ [Mobile
networks]
→ [Access Point Names]
2
→ [Reset to default]
✔ INFORMATION
･ You can delete access point one by one by selecting an
access point from the APN list screen,
→ Tap [Delete APN].
❖ sp-mode
sp-mode is an ISP for NTT DOCOMO smartphone. In addition
to accessing Internet, you can use the mail service using the
same address as i-mode mail (@docomo.ne.jp), etc.
･ sp-mode is a service requiring subscription. For details on
sp-mode, refer to NTT DOCOMO website.
WIRELESS & NETWORKS