Settings
136
❖
Clear credentials
Clear all authentication information, certificates and VPN
settings from the authentication storage.
1
From the Home screen,
→
[Settings]
→
[Security]
2
[Clear credentials]
→
[OK]
◆
SD card password settings
Set a password to microSD card to prevent others from
misusing.
･
Some microSD cards may not support this function.
･
To set SD card password, set a security unlock preference
which requires authentication on the lock screen in advance.
→
P127
1
From the Home screen,
→
[Settings]
→
[Security]
2
[SD card password settings]
→
Authenticate
3
Set required items
･
When precautions about unmount SD card appear, tap
[OK].
Register password :
Register microSD password (within
16 one-byte numbers).
･
1 password per a microSD card and up to 20 passwords
can be registered. When number of registrations
exceeds the limit, the oldest registration is deleted to
register a new one.
Authenticate password :
Authenticate microSD card to
which a password is set on another terminal.
Change password :
Change SD card password.
Delete password :
Delete SD card password.
Forcibly delete password :
Delete all data including micro
SD card password.
■
When a password is set to microSD card
Password authentication is required when the microSD card is
attached to other terminal. If you attach it to a PC or a phone
without password setting function, using the data or
formatting cannot be made.
◆
Encryption settings
❖
Encrypt tablet
Encrypt all data (including settings and applications) in the
terminal. After encryption, you need to enter security code or
password to decrypt each time you turn the terminal on. To
disable encryption, you need to reset the terminal to default.
･
Set [Security code] or [Password] for the security unlock
preference in advance.
→
P127
1
From the Home screen,
→
[Settings]
→
[Security]
→
[Encryption settings]
2
[Encrypt tablet]
→
[Encrypt tablet]
→
Authenticate
→
[Encrypt tablet]
To Next Page
Loading...
Need help?
General