Fujitsu F-02F User Manual

International roaming
157
By default, the terminal is set to automatically search and
switch to an available network. To switch network manually,
perform the following operations.
･ If you release SIM lock and use SIM by a carrier other than
NTT DOCOMO to perform data communication, set an
access point (APN) before use. → P106
◆ Setting Network Mode
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...]
→ [Mobile
networks]
→ [Network Mode]
2
[LTE/3G/GSM (Auto)]/[LTE/3G]/[GSM]
✔ INFORMATION
･ If the mode is set to [LTE/3G/GSM (Auto)] and a GSM/GPRS
network and 3G network of the same network operator are
detected at the same time, connection to a 3G network is
given priority.
･ If the mode was set to [GSM] in the country you visited, set
the mode to [LTE/3G] or [LTE/3G/GSM (Auto)] after returning
to Japan.
◆ Setting a network operator manually
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...]
→ [Mobile
networks]
→ [Network operators]
Available networks are searched for and displayed.
･ If an error occurs in network search, unmark [Data
enabled] and retry. → P113
2
Select a network of the network operator
✔ INFORMATION
･ If the network operator was set manually in the country you
visited, set [Network operators] to [Choose automatically]
after returning to Japan.
◆ Setting Data roaming
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...]
→ [Mobile
networks]
2
[Data roaming] → Check the contents on the
Attention screen, [OK]
Settings for overseas use

Fujitsu F-02F Specifications

General

Brand	Fujitsu
Model	F-02F
Category	Tablet
Language	English