Applications
83
❖
Playing recorded program
1
On the TV watching screen,
→
[
録画一覧
(Recording list)]
2
Select data
･
On the recording list, appears for the data recorded
in Full Seg.
･
Tap the playing screen in full-screen mode to display
the playback controller.
(from the left)
: Rewind 5 seconds
: Fast-rewind (switch to 2x/10x by each tapping)
/ : Pause/play
: Fast-forward (switch to 1.5x/2x/10x by each tapping
for 1Seg, switch to 2x/10x by each tapping for Full
Seg)
: Forward 15 seconds
･
If playback ended halfway in the previous session,
playback resumes from where it left off.
･
UD
: Adjust volume
✔
INFORMATION
･
On the recording list, touch and hold recorded data
→
to
display recorded program information, change title name, or
protect/unprotect recorded program.
･
To delete a recorded data, touch and hold a recorded data
→
→
[OK]. To delete all items, touch and hold a recorded data
→→
[
すべて選択
(Select all)]
→→
[OK].
◆
TV settings
1
On the TV watching screen,
→
[
設定
(Settings)]
2
Set required items
文字スーパー設定
(Subtitle setting) :
Set to show/hide
subtitle in Full Seg.
データ放送設定
(Data broadcasting settings) :
Make data
broadcasting settings.
アラーム設定
(Alarm setting) :
Notify with sound or
vibration when starting reserved program.
オフタイマー設定
(Off-timer setting) :
Set time until TV is
turned off.
なめらかモード
(Smooth mode) :
Smooth video image.
Marking [
なめらかモード
(Smooth mode)] checkbox
increases battery consumption and shortens the
available watching time.
長時間モード
(Long play mode) :
Set to reduce the battery
consumption so as to watch TV for a long time
(Watching/recording in long play mode can be used for
1Seg only).
･
Set
長時間モード
(Long play mode) for watching the
area 1Seg program broadcasted to the specified area
such as an event site.
外部アンテナ利用
(Use external antenna) :
Switch signal-
receiving antenna to an external antenna (USB coaxial
conversion antenna cable).
･
Even after ending TV, the setting remains.
バックグラウンド再生
(Background play) :
Continue
outputting TV audio even when the terminal returns to
the Home screen or goes into the sleep mode.
To Next Page
Loading...
Need help?
General