Fujitsu M10 - Page 124

2U center
1U center
Mounting
area (4U)
REAR
C
Figure 3-46
Securing the cable support fixing brackets and the rails
●
For the Type-2 cable support
a. Loosen the four screws (C in Figure 3-47) from the inside of the cable support.
Figure 3-47
Removing the cable support fixing brackets (1)
b. Slide the cable support fixing brackets (D in Figure 3-48) to remove them.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015110