Fujitsu M10 User Manual

Table 1-5
Workflow for connections through crossbar boxes (continued)
Step (work time (*1)) Work description Referenc e
Initial diagnosis (approx. 117 minutes/approx. 151 minutes)
12 Connect the system management
terminal to the chassis.
"6.1 Connecting the System
Management Terminal to the Chassis"
Required
13 Confirm that the chassis identification
IDs (BB-IDs) are set.
"6.2.1 Checking the BB-ID settings
(for the SPARC M10-4S)"
Required
14 Turn on the input power. "6.2.2 Turning on the input power
and starting the XSCF"
Required
15 Log in to the SPARC M10-4S, and
check the firmware version number,
altitude setting, and time setting.
"6.3 Logging In to the XSCF"
"6.4 Checking the XCP Version"
"6.5 Checking the Altitude Setting"
"6.6 Checking the Time Setting"
Required
16 Perform an initial diagnosis test on the
physical system board (PSB).
"6.7 Performing a Diagnosis Test" Required
17 Check the status of mounted
components.
"6.8 Checking the Component
Status"
Required
Initial system settings (approx. 130 minutes/approx. 200
minutes)
18 Set the password policy. "7.1 Setting the Password Policy" Required
19 Set a user account and password. "7.2 Setting a User Account and
Password"
Required
20 Configure the telnet or SSH service. "7.3 Configuring the Telnet/SSH
Service"
Required
21 Configure the HTTPS service. "7.4 Configuring the HTTPS
Service"
Required
22 Configure the
XSCF network. "7.5 Configuring the XSCF
Network"
Required
23 When duplicating memory, configure
memory mirroring.
"7.6 Configuring Memory
Mirroring"
Optional
24 Create the PPAR configuration
information (PCL).
"7.7 Creating a Physical Partition
Configuration List (PCL)"
Required
25 Assign the system board (PSB) to the
physical partition.
"7.8 Assigning a System Board
(PSB) to a Physical
Partition (PPAR)"
Required
26 Set a CPU operational mode for the
physical partition.
"7.9 Setting a CPU Operational
Mode for the Physical Partition"
Optional
27 Clear the difference between the
system time and physical partition
(PPAR) time.
"7.10 Synchronizing the Physical
Partition (PPAR) Time and XSCF
Time"
Required
28 Add a CPU Activation key to
the
system.
"7.11 Registering a CPU Activation
Key"
Required
(*6)
29 Assign CPU resources to the physical
partition.
"7.12 Assigning CPU Core
Resources"
Required
Chapter 1 Understanding the Installation Flow 11

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English