Fujitsu M10 User Manual

Table 2-10
Electrical specifications (SPARC M10-1) (continued)
Item Specification
Input voltage of 100 to 120 VAC Input voltage of 200 to 240 VAC
CPU type:
SPARC64 X
CPU type:
SPARC64 X+
CPU type:
SPARC64 X
CPU type:
SPARC64 X+
Rated current
(*1)
Japan
Outside Japan
8.2 A
7.8 A
8.7 A
8.2 A
4.0 A
3.8 A
4.2 A
4.0 A
Maximum
power
consumption
Japan
Outside Japan
806 W
763 W
849 W
805 W
783 W
740 W
824 W
782 W
Apparent power Japan
Outside Japan
822 VA
778 VA
866 VA
821 VA
807 VA
763 VA
849 VA
806 VA
Rush current (*2) 40 A peak or less 40 A peak or less
Leakage current (*2) 1.75 mA 1.75 mA
*1 The current that flows through each power cord in a redundant configuration is half the value listed in Table
2-10.
*2 The value is per power cord.
Table 2-11
Electrical specifications (SPARC M10-4)
Item Specification
CPU type: SPARC64 XCPU type: SPARC64 X+
Input voltage 200 to 240 VAC
Number of power cords 2 (1 for each PSU)
Power cord length Maximum length of 3.0 m
(9.8 ft.)
Redundancy
1+1 redundant config ura tio n
Frequency 50 Hz/60 Hz, single phase
Rated current
(*1)
Japan
Outside Japan
14.8 A
14.1 A
16.0 A
15.7 A
Maximum
power
consumption
Japan
Outside Japan
2,891 W
2,765 W
3,208 W
3,082 W
Apparent power Japan
Outside Japan
2,950 VA
2,821 VA
3,273 VA
3,145 VA
Rush current (*2) 45 A peak or less
Leakage current (*2) 1.75 mA
*1 The current that flows through each power cord in a redundant configuration is half the value listed in Table
2-11.
*2 The value is per power cord.
Chapter 2 Planning and Preparing for System Installation 55

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English