Fujitsu M10 User Manual

Table 2-12
Electrical specifications (SPARC M10-4S)
Item Specification
CPU type: SPARC64 XCPU type: SPARC64 X+
Input voltage 200 to 240 VAC
Number of power cords 2 (1 for each PSU)
Power cord length Maximum length of 3.0
m (9.8 ft.)
Redundancy 1+1 redundant
configuration
Frequency 50 Hz/60 Hz, single
phase
Rated current (*1) Japan
Outside Japan
14.8 A
14.2 A
16.0 A
16.0 A
Maximum power
consumption
Japan
Outside Japan
2,905 W
2,779 W
3,425 W
3,299 W
Apparent power Japan
Outside Japan
2,964 VA
2,836 VA
3,495 VA
3,366 VA
Rush current (*2) 45 A peak or less
Leakage current (*2) 1.75 mA
*1 The current that flows through each power cord in a redundant configuration is half the value listed in Table
2-12.
*2 The value is per power cord.
Table 2-13
Electrical specifications (Expansion rack: Single-phase power feed model) (*1)
Item Specification
1 expansion rack 2 expansion racks
Input voltage 200 to 240 VAC 200 to 240 VAC
Number of power cords 8 8
Power cord length 4.0 m (13.1 ft.) 4.0 m (13.1 ft.)
Redundancy (*2) 1+1 redundant configuration 1+1 redundant configuration
Frequency 50 Hz/60 Hz 50 Hz/60 Hz
Rated current (*3) Maximum of 40 AMaximum of 40 A
Rated current (*4) (*5) 6.9 A9.0 A
Maximum power consumption (*4) 1,354 W1,754 W
Apparent power (*4) 1,382 VA 1,790 VA
Rush current (*3) (*4) 80 A
peak or less 80 A peak or less
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 201556

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English