30 Operating Manual RX200 S3
Unpacking the Server Hardware Installation
4.1 Unpacking the Server
V CAUTION!
Please note the safety instructions in chapter “Important Infor-
mation” on page 17.
If you need to lift or transport the server, ask other people to help
you.
Do not unpack the server until it is at its installation location.
Ê Transport the server to the place where you want to set it up.
You should retain the original server packaging in case further transportation is
necessary.
Ê Unpack all individual parts.
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The identification rating plate is located on the rear area on the server.
Notify your supplier immediately should you discover that the delivery does not
correspond to the delivery receipt.
To Next Page
Loading...
Need help?
General
