Fujitsu PRIMERGY RX200 S3 User Manual

52 Operating Manual RX200 S3
Controls and Displays Startup and Operation
5.1.5 Indicators of the hot-plug system fans
A bicolor status indicator (LED on the system board) is assigned to each system
fan. The status indicators are not visible unless the housing is open. The
respective LED is set with commands in Server Management.
LED Meaning
green lights Fan in operation.
orange lights Possible fan failure
Flashing Fan failure

Fujitsu PRIMERGY RX200 S3 Specifications

General

Number of Processors	2
Storage	Up to 6 x 3.5" SAS/SATA HDD
RAID Support	RAID 0, 1
Network	Dual Gigabit Ethernet
Form Factor	1U Rack
Power Supply	Hot-plug redundant power supply